PCB TOOLS / Electronics reference
SMD Package Dimensions: Inch/Metric Codes, MELF, SOD and SOT
Compare historical dimensions for chip resistors, capacitors and common discrete packages. Distinguish inch and metric codes, body size, lead span and the manufacturer’s land pattern.
Quick answer
Always identify the code system before interpreting “0402”: inch 0402 is approximately 1.0×0.5 mm (metric 1005), whereas metric 0402 is approximately 0.4×0.2 mm (inch 01005). Package name or size alone cannot establish resistor power, capacitor voltage rating, transistor pin functions or a recommended land pattern.
Scope
The 50 legacy rows cover chip R/C, MELF, SOD and SOT approximate dimensions. Although 1 in=25.4 mm, package codes are nominal size categories; their digits are not exact manufacturing dimensions. Body and overall lead-span sizes are separate. Use the specific part’s current package drawing for lands, orientation, terminal connections and tolerances.
Reading example
For an inch 0402 resistor, cross-reference metric 1005, not metric 0402. As one device-family example, Vishay D/CRCW0402 specifies a 1.00±0.05 by 0.50±0.05 mm body. Its power depends on standard/extended conditions, so the source’s 1/16 W is not a guarantee for every 0402 part. For SOT23, distinguish the 2.9×1.3 mm body from the overall lead span.
Checked reference tables
| Inch code | Metric code | Approximate L×W (mm) |
|---|---|---|
| 01005 | 0402M | 0.4 × 0.2 |
| 0201 | 0603M | 0.6 × 0.3 |
| 0402 | 1005M | 1.0 × 0.5 |
| 0603 | 1608M | 1.6 × 0.8 |
| 0805 | 2012M | 2.0 × 1.25 |
| 1206 | 3216M | 3.2 × 1.6 |
Nominal correspondence resolves code ambiguity only. Actual dimensions, tolerances, thickness and terminations depend on the product family.
Legacy tables with visible corrections
Resistors and Capacitors
| Code | Metric Code | Size (in) | Size (mm) | Power * |
|---|---|---|---|---|
| 01005 | 0402 | 0.016 × 0.008 | 0.41 × 0.20 | 1/32 W |
| 0201 | 0603 | 0.024 × 0.012 | 0.61 × 0.30 | 1/20 W |
| 0402 | 1005 | 0.04 × 0.02 | 1.0 × 0.51 | 1/16 W |
| 0603 | 1608 | 0.063 × 0.031 | 1.6 × 0.79 | 1/16 W |
| 0805 | 2012 | 0.08 × 0.05 | 2.0 × 1.3 | 1/10 W |
| 1206 | 3216 | 0.126 × 0.063 | 3.2 × 1.6 | 1/8 W |
| 1210 | 3225 | 0.126 × 0.1 | 3.2 × 2.5 | 1/4 W |
| 1806 | 4516 | 0.177 × 0.063 | 4.5 × 1.6 | 1/4 W |
| 1812 | 4532 | 0.18 × 0.12 | 4.6 × 3.0 | 1/2 W |
| 2010 | 5025 | 0.2 × 0.1 | 5.1 × 2.5 | 1/2 W |
| 2512 | 6432 | 0.25 × 0.12 | 6.3 × 3.0 | 1 W |
MELF (metal electrode leadless face)
| Name | Code | Size (mm) | Power | Note |
|---|---|---|---|---|
| MicroMelf (MMU) | 0102 | 2.2 × 1.1 (Ø) | 1/5W 100V | fit 0805 |
| MiniMelf (MMA) | 0204 | 3.6 × 1.4 (Ø) | 1/4W 200V | fit 1206 |
| Melf (MMB) | 0207 | 5.8 × 2.2 (Ø) | 1W 500V |
SOD (small-outline diode)
| Code | Size (mm) | Size with terminals (mm) |
|---|---|---|
| SOD-962 | 0.6 × 0.3 × 0.3 | 0.6 × 0.3 × 0.3 |
| SOD-923 | 0.9 × 0.6 × 0.4 | 1.0 × 0.6 × 0.4 |
| SOD-723 (SC-104A) | 1.0 × 0.6 × 0.5 | 1.4 × 0.6 × 0.5 |
| SOD-523 (SC-79) | 1.2 × 0.8 × 0.6 | 1.6 × 0.8 × 0.6 |
| SOD-323 (SC-90) | 1.7 × 1.25 × 0.7 | 2.5 × 1.25 × 0.7 |
| SOD-123 | 2.7 × 1.5 × 1.40 | 3.7 × 1.5 × 1.40 |
| SOD-80C | 3.5 × 1.5 (Ø) | |
SOT (small-outline transistor)
| Code | Size (mm) | Size with terminals (mm) | Terminals |
|---|---|---|---|
| SOT-223 | 6.5 × 4.6 × 1.8 | 6.5 × 7.0 × 1.8 | 4 (3 + heat-transfer pad) |
| SOT-252 | 6.6 × 6.1 × 2.2 | 6.6 × 10 × 2.2 | 4 (3 + heat-transfer pad) |
| SOT-263 (D2-PAK, SC-83) | 10 × 9 × 4.5 | 10 × 13 × 4.5 | 4 (3 + heat-transfer pad) |
| SOT-89 | 4.5 × 2.5 × 1.5 | 4.5 × 4.2 × 1.5 | 4 (center pin connected to heat-transfer pad) |
| SOT-23 (SC-59, TO-236-3) | 2.9 × 1.3 × 1.0 | 2.9 × 2.4 × 1.0 | 3 |
| SOT-346 (SC-59) | 2.9 × 1.6 × 1.1 | 2.9 × 2.8 × 1.1 | 3 |
| SOT-23-5 (SOT-25, SC-74A) | 5 | ||
| SOT-457 (SC-74) | 6 | ||
| SOT-23-6 (SOT-26, SC-95) | 6 | ||
| SOT-23-8 (SOT-28) | 3.0 × 2.4 × 0.8 | 3.0 × 2.8 × 0.8Legacy record: “3.0. × 2.8 × 0.8”. Only the extra full stop in source text 3.0. is removed. These remain historical approximate dimensions; verify the specific package drawing. | 8 |
| SOT-323 (SC-70) | 2.0 × 1.25 × 0.9 | 2.0 × 2.1 × 0.9 | 3 |
| SOT-343 (SC-82) | 4 | ||
| SOT-353 (SC-88A) | 5 | ||
| SOT-363 (SC-88, SC-70-6) | 6 | ||
| SOT-416 (SC-75) | 1.6 × 1.6 × 0.7 | 3 | |
| SOT-490 (SC-81) | 1.6 × 0.86 × 0.7 | 1.6 × 1.6 × 0.7 | 3 |
| SOT-523 (SC-75A) | 1.6 × 0.8 × 0.7 | 1.6 × 1.6 × 0.7 | 3 |
| SOT-543 (SC-107A) | 1.6 × 1.2 × 0.5 | 1.6 × 1.6 × 0.5 | 4 |
| SOT-553 (SC-107BB) | 5 | ||
| SOT-563 | 6 | ||
| SOT-663 | 1.6 × 1.2 × 0.5 | 1.6 × 1.6 × 0.5 | 3 |
| SOT-665 | 5 | ||
| SOT-666 | 6 | ||
| SOT-723 (SC-105AA) | 1.2 × 0.8 × 0.5 | 1.2 × 1.2 × 0.5 | 3 |
| SOT-883 (SC-101) | 1 × 0.6 × 0.5 | 3 (leadless) | |
| SOT-886 | 1.5 × 1.0 × 0.5 | 6 (leadless) | |
| SOT-891 | 1.0 × 1.0 × 0.5 | 6 (leadless) | |
| SOT-953 | 1.0 × 0.8 × 0.4 | 1.0 × 1.0 × 0.4 | 5 |
| SOT-963 | 6 | ||
Legacy source notes and applicability
These notes retain the legacy record. For corrected facts and applicability, use this page’s quick answer, scope and visible table corrections.
* Use these values as guidance only, always consult the datasheet for the exact value.
MELF (metal electrode leadless face)
SOD (small-outline diode)
SOT (small-outline transistor)
Frequently asked questions
Why is an M suffix helpful for size codes?
A label such as 0402 (1005M) identifies the inch nominal code and the metric equivalent. An unqualified 0402 is ambiguous. Verify millimeter dimensions in both procurement and CAD libraries.
Can I create PCB lands directly from this table?
Use it as a body/lead-span reference, not a complete land-pattern specification. It lacks full termination, tolerance, assembly and solder-mask details. Use the specific part’s official package/land drawing and verify pin numbering and orientation.
Related tools and references
Sources and verification
- Murata: inch/metric chip-capacitor size correspondence
- Vishay: D/CRCW body dimensions, tolerances and power conditions
- Nexperia: official SOT23 / TO-236AB package drawing
Legacy baseline: the Electrodoc Pro 5.2 data package. Raw records are retained and checked factual corrections are shown explicitly.