PCB TOOLS / Electronics reference

Resistor Preferred Values: E6, E12, E24, E48, E96 and E192

Look up nominal values in six E-series, interpret the table’s base-100 coefficients and distinguish series density from tolerance. Compare the values with the site’s preferred-value calculators.

Quick answer

E24 provides 24 nominal values per decade and E192 provides 192. Entries use a base of 100: 470 represents 4.70×10ⁿ Ω, for example 4.7 kΩ. A series defines a nominal-value set; it does not require every component to have the tolerance printed in the legacy heading.

Scope

Use this reference for resistor nominal values and comparisons between series. Ideal geometric spacing is vᵢ=10^(i/N), i=0…N−1. Use published series values for selection: historical rounding and adjustments, especially in E6/E12/E24, prevent simple rounding of that expression from reproducing the full IEC table. Blank cells mean that the sparser series does not include that row.

Reading example

E24 entry 470 can represent 470 Ω, 4.7 kΩ or 47 kΩ by decade scaling. The site’s relative-error search maps an E24 target of 5000 Ω to 5100 Ω and preserves 4700 Ω. The legacy E192 table incorrectly printed 378 for 374; the checked table displays 374, matching both the package and site calculation series. A target of 378 Ω still selects 379 Ω in E192, with no algorithm change.

Legacy tables with visible corrections

E-series nominal coefficients (base 100; heading tolerances are common associations)
E6 (±20%)E12 (±10%)E24 (±5%)E48 (±2%)E96 (±1%)E192 (±0.5%)
100100100100100100
101
102102
104
105105105
106
107107
109
110110110110
111
113113
114
115115115
117
118118
120120120
121121121
123
124124
126
127127127
129
130130130
132
133133133
135
137137
138
140140140
142
143143
145
147147147
149
150150150150150
152
154154154
156
158158
160160
162162162
164
165165
167
169169169
172
174174
176
178178178
180180180
182182
184
187187187
189
191191
193
196196196
198
200200200
203
205205205
208
210210
213
215215215
218
220220220221221
223
226226226
229
232232
234
237237237
240240
243243
246
249249249
252
255255
258
261261261
264
267267
270270271
274274274
277
280280
284
287287287
291
294294
298
300301301301
305
309309
312
316316316
320
324324
328
330330330332332332
336
340340
344
348348348
352
357357
360361
365365365
370
374374Legacy record: “378”. The source value 378 is a transcription error. Vishay’s E192 table and this package’s series.json both contain 374. The raw record is retained.
379
383383383
388
390390392392
397
402402402
407
412412
417
422422422
427
430432432
437
442442442
448
453453
459
464464464
470470470470
475475
481
487487487
493
499499
505
510511511511
517
523523
530
536536536
542
549549
556
560560562562562
569
576576
583
590590590
597
604604
612
619619619
620626
634634
642
649649649
657
665665
673
680680680681681681
690
698698
706
715715715
723
732732
741
750750750750
759
768768
777
787787787
796
806806
816
820820825825825
835
845845
856
866866866
876
887887
898
909909909
910920
931931
942
953953953
965
976976
988
Legacy source notes and applicability

These notes retain the legacy record. For corrected facts and applicability, use this page’s quick answer, scope and visible table corrections.

The formula to calculate standard value is:
Val = d x 10⁽i/N⁾where:
d = decate multiplier (1, 10, 100, 1000, etc)
i = 0...(N-1)
N = series (12, 24, 48, 96, 192)

Frequently asked questions

Why does E24 omit many integer values?

It selects 24 nominal points per decade for production, range coverage and stocking. E48/E96/E192 offer finer nominal spacing; availability and ratings still depend on the part.

Is an E96 resistor necessarily more accurate than E24?

No. The E-series specifies nominal values. Tolerance, temperature coefficient, drift and power rating are separate component parameters. The same 1 kΩ nominal value can have several tolerance grades.

Related tools and references

Sources and verification

Legacy baseline: the Electrodoc Pro 5.2 data package. Raw records are retained and checked factual corrections are shown explicitly.