PCB TOOLS / Electronics reference
IEC 60320 C1–C24 Appliance Connector Chart
Distinguish cord connectors, appliance inlets and interconnection couplers, with C-sheet pairings, temperature classes and rating conditions.
Quick answer
A C13 is a female-contact cord connector mating with a C14 male-contact appliance inlet. C15/C16 are hot-condition types; C15A/C16A and C21/C22 are very-hot types. Keying and the ratings of the complete assembly must match.
Scope
The 13 archived C-sheet rows remain, with a supplemental role table. Drawings identify features, not dimensions or wiring views. C3/C4 and C11/C12 are historical entries, not claims of current standard inclusion. A values are international references; °C values classify interface/pin temperature rather than ambient equipment temperature.
Reading example
The archived C13/C14 row states 10 A and 70 °C; Interpower also lists a 15 A North American family. Approval differences do not upgrade every cord set. Cable, plug, connector and appliance limits all apply.
Checked reference tables
| Entry | Role | Pairing / limit |
|---|---|---|
| Odd C1/C5/C7/C9/C13 etc. | Female-contact cord connector | Mates with the corresponding even C-sheet inlet |
| Even C2/C6/C8/C10/C14 etc. | Male-contact appliance inlet | Not a household wall-socket letter type |
| A/B, C/D, E/F etc. | Interconnection plug-connector/outlet sheet pairs | Read separately from C-numbered sheets |
| C3/C4; C11/C12 | Historical archived forms | No current standard inclusion or interchangeability claimed |
Legacy tables with visible corrections
Frequently asked questions
Can C15 replace C13?
Some manufacturer mating charts permit particular hot-condition connectors with cold-condition inlets. Verify the exact mating chart, approval, current and cord temperature rating.
Is 155 °C an allowable ambient temperature?
No. It is a pin/interface temperature classification. Equipment, cable and insulation have separate limits.
Related tools and references
Sources and verification
Legacy baseline: the Electrodoc Pro 5.2 data package. Raw records are retained and checked factual corrections are shown explicitly.














