PCB TOOLS / Electronics reference

RJ Telephone Pinouts: RJ11, RJ14, RJ25, RJ48 and RJ61

Look up USOC telephone contact functions and distinguish 6P2C, 6P4C, 6P6C, 8P8C and conductor pairs. The legacy regional color table is retained with explicit limits on using colors as wiring instructions.

Quick answer

On a six-position RJ11, the telephone pair uses 3/4. RJ14 adds 2/5 and RJ25 adds 1/6. 6P counts positions; 2C/4C/6C counts fitted contacts. RJ61 assigns four pairs to 4/5, 3/6, 2/7 and 1/8; this is not Ethernet T568A/B.

Scope

Applies to the source’s USOC telephone and digital-line examples. T/R names Tip/Ring conductors, not universal positive/negative voltages; the source +/- column assumes traditional telephone DC conditions. Check the equipment manual for RJ48 direction, polarity, shielding and loopback. An RJ48X jack’s test shorting is a jack function, not something established by plug shape. Diagrams show functional numbering without claiming a mating-face or solder-side view.

Reading example

For one telephone line use 3=R1 and 4=T1. For a second line add 2=T2 and 5=R2. Six positions in a shell do not establish six fitted contacts. In four-line USOC, line 4 uses 1/8; do not treat 1/2 as the same pair as in Ethernet.

Checked reference tables

USOC pair lookup
Wiring applicationPaired contactsFitted contacts
RJ113/42
RJ143/4 + 2/54
RJ253/4 + 2/5 + 1/66
RJ614/5 + 3/6 + 2/7 + 1/88

Legacy tables with visible corrections

Six-position telephone interface: verify USOC pairs and populated contacts separately
Six-position telephone interface: verify USOC pairs and populated contacts separately. Original functional numbering, not a mechanical view; verify device data.
RJ11/14/25: six positions, pairs and fitted contacts
PinPairT/R+/-RJ25 (6P6C)RJ14 (6P4C)RJ11 (6P2C)
13T3+1--
22T2+22-
31R1-333
41T1+444
52R2-55-
63R3-6--
Legacy six-position plug colors (not universal wiring guarantees)
PinCat 5e/6 colors25-pair colorsOld colorsGerman colorsAustralian colors
1white/greenwhite/greenwhite/greenwhite/greenwhitewhitepinkpinkorangeorange
2white/orangewhite/orangewhite/orangewhite/orangeblackblackgreengreenredred
3blueblueblue base, white tracerblue base, white tracerredredwhitewhiteblueblue
4white/bluewhite/bluewhite/bluewhite/bluegreengreenbrownbrownwhitewhite
5orangeorangeorange base, white tracerorange base, white traceryellowyellowyellowyellowblackblack
6greengreengreen base, white tracergreen base, white tracerbluebluegreygreygreengreen

RJ48C and RJ48X

Original EIA-561 · RS232 on 8P8C signal-numbering diagram
Original EIA-561 · RS232 on 8P8C functional numbering map; verify actual pin 1 and view. Not a mechanical view.
Legacy RJ48C/X signals (direction and 7/8 roles depend on equipment)
PinPairSignalColor
1RRX Ringorange base, white tracerorange base, white tracer
2TRX Tipwhite/orangewhite/orange
3reservedwhite/greenwhite/green
4R1TX Ringblue base, white tracerblue base, white tracer
5T1TX Tipwhite/bluewhite/blue
6reservedgreen base, white tracergreen base, white tracer
7Equipment-dependent: shield or unconnectedLegacy record: “shield”. Suttle’s USOC example uses 7/8 for shield continuity, whereas Cisco’s listed T1/E1 port leaves them unconnected. Retain the source but do not generalize it to all equipment.white/brownwhite/brown
8Equipment-dependent: shield or unconnectedLegacy record: “shield”. The source shield label is not universal; do not automatically connect contact 8 to a cable screen.brown base, white tracerbrown base, white tracer

RJ61 (USOC)

Original EIA-561 · RS232 on 8P8C signal-numbering diagram
Original EIA-561 · RS232 on 8P8C functional numbering map; verify actual pin 1 and view. Not a mechanical view.
RJ61 four-line USOC (not a substitute for T568A/B)
PinPairWireColor
1T4tipwhite/brownwhite/brown
2T3tipwhite/greenwhite/green
3T2tipwhite/orangewhite/orange
4R1ringblue base, white tracerblue base, white tracer
5T1tipwhite/bluewhite/blue
6R2ringorange base, white tracerorange base, white tracer
7R3ringgreen base, white tracergreen base, white tracer
8R4ringbrown base, white tracerbrown base, white tracer
Legacy source notes and applicability

These notes retain the legacy record. For corrected facts and applicability, use this page’s quick answer, scope and visible table corrections.

6 pin RJ11, RJ14, RJ25 male connector (Plug)
white/green
white
pink
orange
white/orange
black
green
red
blue
blue/white
white/blue
brown
orange/white
yellow
green/white
grey
RJ48C and RJ48X
8 pin RJ48 male connector (Plug)
white/brown
brown/white
RJ61 (USOC)
8 pin RJ61 male connector (Plug)

Frequently asked questions

Is RJ11 synonymous with 6P6C?

No. A common single-line RJ11 uses two contacts in six positions. 6P6C means six positions and six contacts; the common three-line USOC arrangement is RJ25. Assemblies may retain extra contacts, so verify the wiring application.

Do identical-looking RJ48C and RJ48X plugs imply the same function?

Not necessarily. RJ48X involves a jack’s unplugged test-shorting/loopback mechanism. An identical 8P8C plug does not reveal that mechanism. Use the equipment documentation for digital-line direction and polarity.

Related tools and references

Sources and verification

Legacy baseline: the Electrodoc Pro 5.2 data package. Raw records are retained and checked factual corrections are shown explicitly.