PCB TOOLS / Electronics reference
FireWire pinout: IEEE 1394 4/6/9-pin signals and power
Look up common FireWire 400/800 4-, 6-, 9-pin TPA/TPB pairs, bus power, references and outer shield. Visible corrections qualify the fixed+30V entry and 9-pin reference labels; wire colors are only archived examples.
Quick answer
The4-pin form carries two differential pairs and omits VP/VG power. On6-pin, 1=VP and 2=VG; on 9-pin, 8=VP and 6=VG, with 5=TPA(R), 9=TPB(R), and 7=SC reserved(no connection in the cited Apple equipment). Outer shell shielding is not an extra universal power-ground pin.
Scope
A historical external4/6/9-pin reference checked against TI and Apple legacy documentation. It is not a motherboard-header pinout, USB conversion scheme or power guarantee for arbitrary equipment. Original diagrams do not reconstruct mating/solder geometry or mechanical direction.
Reading example
A4-pin DV camera connected to a6-pin host has no bus-power contacts at the camera and still needs its specified supply. At one6-pin port, 3/4=TPB−/+ and 5/6=TPA−/+. A complete1394 cable crosses pair groups between endpoints; do not turn a one-port table into an arbitrary straight-through bare-wire cable.
Legacy tables with visible corrections
Firewire (IEEE-1394)
| Connector | Name | Description | Color | ||
|---|---|---|---|---|---|
| 4 Pin | 6 Pin | 9 Pin | |||
| 1 | 8 | VP(bus power)Legacy record: “VCC”. Use the documented VP designation rather than implying a fixed logic VCC rail. | Bus power; voltage depends on revision and equipmentLegacy record: “+30V unregulated DC”. The original+30V is an overgeneralized ceiling, not a constant output; see TI ranges and the Apple device value. | White | |
| 2 | 6 | VG(power return)Legacy record: “GND”. Distinguish power return from9-pin 5/9 pair references and the outer shell. | Ground | Black | |
| 1 | 3 | 1 | TPB- | Twisted pair B | Orange |
| 2 | 4 | 2 | TPB+ | Twisted pair B | Blue |
| 3 | 5 | 3 | TPA- | Twisted pair A | Red |
| 4 | 6 | 4 | TPA+ | Twisted pair A | Green |
| 5 | TPA(R): pair-A referenceLegacy record: “A shield”. Apple Table3-3 identifies the pair-A ground reference; the shield shorthand does not approve arbitrary power-ground wiring. | ||||
| 7 | SC: reserved status contact(N/C in cited equipment)Legacy record: “N/C”. Qualify the original N/C with its contact name; do not infer every implementation internal connection. | ||||
| 9 | TPB(R): pair-B referenceLegacy record: “B shield”. Apple Table3-3 identifies the pair-B ground reference, separately from VG and shell. | ||||
| Shell | Cable shield | ||||
Legacy source notes and applicability
These notes retain the legacy record. For corrected facts and applicability, use this page’s quick answer, scope and visible table corrections.
Frequently asked questions
Can9-pin 5, 6, 9 and shell all be treated as one ground?
Do not assume that.5/9 are pair references, 6 is bus-power return, and shell is outer shielding; the equipment design determines their actual interconnection.
Can a4-pin cable supply peripheral power?
The standard 4-pin form omits VP/VG; the peripheral needs its own supply. A lookalike proprietary cable is not thereby compatible.
Can FireWire become USB by changing the plug?
No. Their electrical interfaces and protocols differ; ordinary passive rewiring does not perform conversion. Verify dedicated hardware, host and software support.
Related tools and references
Sources and verification
- TI SLEA072A: 6-pin allocation, voltage ranges and late-VG damage
- Apple official archive: 17-inch PowerBook G4, Tables3-2/3-3
Legacy baseline: the Electrodoc Pro 5.2 data package. Raw records are retained and checked factual corrections are shown explicitly.