PCB TOOLS / Electronics reference

Fiber-Optic Color Codes: TIA Sequence, Jackets and Swisscom Reference

Distinguish individual-fiber colors, buffer-tube numbering, cable jackets and connector colors. Look up the common TIA12-color sequence and source Swisscom/DIN tables, with explicit fiber20 and historical-jacket qualifications.

Quick answer

The common TIA1–12 sequence is blue, orange, green, brown, slate, white, red, black, yellow, violet, rose and aqua. Jackets are a separate identification layer: indoor singlemode commonly yellow, OM1/OM2 orange, OM3/OM4 aqua and OM5 lime green. IEC does not impose one universal numbered sequence on every country; check the product and operator scheme.

Scope

Legacy EIA598-A, Swisscom and DIN labels remain distinct. IEC TR63194 describes regional schemes; IEC60304 identifies colors, not one numbered mapping. High-count cables also require tube number, within-tube position and marking/print. A black outdoor jacket does not identify singlemode versus multimode.

Reading example

If both tubes and fibers follow TIA and each tube holds12 fibers, fiber37 is tube4/position1: blue fiber in a brown tube. Swisscom instead starts with red. In a24-fiber tube, fiber20 is the repeated-black exception; the maker may use a white/other tracer or a natural coating with black marking.

Checked reference tables

Common ordinary-indoor jacket examples; verify printed fiber class
Fiber classCore/cladding (µm)Common jacket
OM162.5/125Orange
OM250/125Orange
OM350/125Aqua
OM450/125Aqua; violet used by some manufacturers
OM550/125Lime green
OS1/OS2Singlemode; per productYellow

Legacy tables with visible corrections

EIA598-A standard

Source EIA598-A sequence; verify product-specific20 marking
PositionBase Color
1Blue
2Orange
3Green
4Brown
5Slate
6White
7Red
8Black
9Yellow
10Violet
11Rose
12Aqua
13-24Repeat1–12 with identification marks; verify maker’s20 exception (source black/yellow).Legacy record: “Colors Repeated with Black Tracer
(20 is Black with yellow tracer)”. Repeated-black marking varies. Corning distinguishes white-traced black tubes from natural/black-marked fibers; yellow is not universal.

Fiber Cordage Jacket Color Standards

Historical jackets: not a current universal mode chart
Fiber Type & ClassDiameter (µm)Jacket Color
Multimode 1a50/125Orange
Multimode 1a62.5/125Slate: legacy/military example; ordinary commercial OM1 commonly orangeLegacy record: “Slate”. Limit slate62.5/125 to its applicable convention; orange OM1 is also common.
Multimode 1a85/125Blue
Multimode 1a100/140Green: legacy/military example, not OM5 lime greenLegacy record: “Green”. The historical100/140 example is not OM5 wideband50/125.
Singlemode IVaAllYellow
Singlemode IVaAllRed: historical/special convention, not a universal singlemode identifierLegacy record: “Red”. Ordinary indoor singlemode is commonly yellow; the repeated source All row does not specify when red applies.

Swisscom color code

Source Swisscom sequence and marking convention
PositionBase Color
1Red
2Green
3Yellow
4Blue
5White
6Violet
7Orange
8Black
9Grey
10Brown
11Pink
12Turquoise
13-2413–24 repeat with marking;20 may be natural—check makerLegacy record: “Colors repeat with 1 stripe”. R&M’s Swisscom example uses natural coating for20 rather than simply repeating black.
25-36Colors repeat with 2 stripes

DIN color code

Source DIN fiber sequence, distinct from DIN47100 copper
PositionBase Color
1Red
2Green
3Blue
4Yellow
5White
6Grey
7Brown
8Violet
9Turquoise
10Black
11Orange
12Pink
Legacy source notes and applicability

These notes retain the legacy record. For corrected facts and applicability, use this page’s quick answer, scope and visible table corrections.

EIA598-A standard
In high fiber count cables fibers are grouped in 6 or 12, and then the groups themselves are numbered.
Groups of fibers can be designated in different ways:
• Fibers are housed inside of colored plastic tubes (or wrapped in colored threads or plastic ribbons): colors of the tubes go in the same sequence of the fibers: Blue, Orange, Green, etc.
• Fibers have black stripes, one, two, three or even four.
Fiber Cordage Jacket Color Standards
Swisscom color code
DIN color code

Frequently asked questions

Does aqua always mean OM3?

No. Ordinary OM3 and OM4 premises cable can both be aqua; some manufacturers use violet for OM4. Read the printed OM class,50/125 designation and transmission specification.

Do TIA and IEC impose the same numbered colors?

No. TIA defines a particular identification scheme. IEC color definitions and regional numbered schemes are separate; the IEC technical report lists regional alternatives rather than creating a universal numbered order.

Does a yellow singlemode jacket identify polish?

It does not. Jacket and connector-endface identification differ; both singlemode PC/UPC and APC can use yellow cable jackets. Check the connector specification.

How is a total fiber number split into tube and position?

Only for fixed k fibers per tube with consecutive tube numbering: tube=ceil(n/k), position=((n−1)mod k)+1. Then apply that cable’s separate tube/fiber schemes.

Related tools and references

Sources and verification

Legacy baseline: the Electrodoc Pro 5.2 data package. Raw records are retained and checked factual corrections are shown explicitly.