PCB TOOLS / Electronics reference
7400-Series Pinouts and Logic: Ten14-Contact Devices
Look up ten7400-series logic functions and14-contact maps, with the historical TTL/CMOS family list. Distinguish7407 open-collector outputs,7414 Schmitt inputs and package-specific numbering.
Quick answer
Common14-contact DIP/SO forms provide quad NAND7400, NOR7402, inverter7404 and open-collector non-inverting7407.7410/7411 are triple3-input NAND/AND;7414 is a Schmitt inverter. VCC14/GND7 in these figures is not universal across other packages.
Scope
Figures cover common14-contact layouts in the listed manufacturer documents, not all historical flatpacks or18/20-contact packages. Supply, thresholds, delay, output structure and5 V tolerance differ by74/LS/HC/HCT/LVC family and exact part. Legacy ns/obsolete labels are historical summaries, not current per-part ratings or lifecycle determinations.
Reading example
7400 gate1 inputs are1/2, output3; A=B=1 givesY=0.7402 instead uses output1 and inputs2/3. On7407, the released output is high impedance: design a pull-up rather than assuming a push-pull high source.
Legacy tables with visible corrections
| Code | Family | Description |
|---|---|---|
| Bipolar | ||
| Standard TTL | (no letters) | |
| L | Low power | Obsolete, very slow |
| H | High speed | Obsolete |
| S | Schottky diodes | Obsolete |
| LS | Low power Schottky | |
| AS | Advanced Schottky | |
| ALS | Advanced low power Schottky | |
| F | Fast | faster than normal Schottky, similar to AS |
| CMOS | ||
| C | CMOS | CMOS 4-15 V operation similar to 4000B series |
| HC | High speed CMOS | Faster, similar performance to LS, 12 nS |
| HCT | TTL compatible high speed CMOS | HC parts with compatible logic levels to bipolar parts |
| AC | Advanced CMOS | Performance between S and F |
| AHC | Advanced high speed CMOS | Three times as fast as HC |
| ALVC | Advanced Low voltage | 1.65-3.3 V, Time Propagation Delay 2 nS |
| AUC | Low voltage | 0.8-2.7 V, TPD < 1.9 nS@1.8V |
| FC | Fast CMOS | Performance similar to F |
| LCX | Low voltage with tolerant inputs | 3V, 5V tolerant inputs |
| LVC | Low voltage with tolerant inputs | 1.65-3.3 V, 5V tolerant inputs, tpd < 5.5 nS@3.3V, tpd < 9 nS@2.5V |
| LVQ | Low voltage | 3.3 V |
| LVX | Low voltage with tolerant inputs | 3.3V, 5V tolerant inputs |
| VHC | Very high speed CMOS | Faster than HC and AHC, 'S' performance in CMOS technology |
| G | GigaHertz rated | Designed to operate beyond 1GHz |
| BiCMOS | ||
| BCT | BiCMOS | TTL-compatible input thresholds, used for buffers |
| ABT | Advanced BiCMOS | TTL-compatible input thresholds, faster than ACT and BCT |
Legacy source notes and applicability
These notes retain the legacy record. For corrected facts and applicability, use this page’s quick answer, scope and visible table corrections.
7402
7404
7407
7408
7410
7411
7414
7432
7486
List of 7400 series integrated circuits
Related entries from the reference
- List of 7400 series integrated circuits See the official sources below
Frequently asked questions
What produces a7407 high level?
When its open collector turns off, the external pull-up/load establishes high level within the exact part’s ratings.
Are ground7 and supply14 universal?
Only for the specified common14-contact layouts. Some flatpacks and other pin counts differ; use the full ordering code’s package drawing.
Related tools and references
Sources and verification
- Texas Instruments: 7400 pins and electrical definitions
- Texas Instruments: 7402 pins and electrical definitions
- Texas Instruments: 7404 pins and electrical definitions
- Texas Instruments: 7407 pins and electrical definitions
- Texas Instruments: 7408/LS08 pins and electrical definitions
- Texas Instruments: 7410 pins and electrical definitions
- Texas Instruments: 7411 pins and electrical definitions
- Texas Instruments: 7414 pins and electrical definitions
- Texas Instruments: 7432 pins and electrical definitions
- Texas Instruments: 7486/LS86A pins and electrical definitions
Legacy baseline: the Electrodoc Pro 5.2 data package. Raw records are retained and checked factual corrections are shown explicitly.









