PCB TOOLS / Electronics reference

Electronic Symbols, Units and Acronyms

Look up 219 archived symbol entries while separating SI units, quantity symbols, component designators and circuit acronyms.

Quick answer

A letter can have multiple meanings: B may mean base or flux density; Q charge, quality factor or a transistor designator; NC normally closed or not connected. SI units A, V and W do not become lowercase for peak or instantaneous quantities; qualify the quantity instead.

Scope

The first A/ampere entry is in the source header, followed by 218 body rows; all positions remain. Manufacturer definitions, subscripts, conditions and polarities take precedence over a glossary. Historical notation is distinguished from SI rules through visible corrections.

Reading example

For R=100 Ω and sinusoidal Vᵣₘₛ=10 V, average power is Vᵣₘₛ²/R=1 W. It is not “1 rms W”: RMS is an operation on quantities such as voltage/current, whereas resistor heating normally uses average real power.

Legacy tables with visible corrections

Electronic Symbols, Units and Acronyms · archived table 1
AAmpere (AC rms or DC)
aArchived peak-current notation; the ampere unit remains A regardless of waveformLegacy record: “Ampere (peak)”. Lowercase a is not an SI unit for peak amperes.
A/DAnalog to digital
ACAlternating current
AC/DCAlternating current or direct current
ADCAnalog-to-digital converter
AFAudio frequency
AhAmpere hour
AMAmplitude modulation
AWGAmerican wire gauge
BTransistor Base electrode
BMagnetizing Flux density
BCDBinary coded decimal
BJTBipolar junction transistor
BVBreakdown voltage
BV_CEOBreakdown voltage, collector-to-emitter junction reverse biased (base open)
BV_CESBreakdown voltage, collector-to-emitter junction reverse biased (base shorted)
BV_CBOLegacy record: “BV_COB”. The described collector-base breakdown with emitter open uses the common CBO subscript order; source was BV_COB.Breakdown voltage, collector-to-base junction reverse biased (emitter open)
BWBandwidth
cCenti (10⁻²)
CCapacitance or capacitor
CTransistor collector electrode
C (Q)Coulomb
CBCommon base configuration
CCCommon collector
CECommon emitter
C_LLoad capacitance
C_OOutput capacitance
dDeci (10⁻¹)
D/ADigital to analog
DCDirect current
DIPDual in-line package
ETransistor emitter electrode
EHFExtremely high frequency
EHVExtra high voltage
ELFExtremely low frequency
EMFElectromotive force
EMIElectromagnetic interference
FFarad
fFrequency
f_abCommon base small-signal cutoff frequency
f_aeCommon emitter small-signal utoff frequency
FETField effect transistor
FFFlip Flop
FMFrequency modulation
f_oscMaximum frequency of oscillation
f_rFrequency at resonance
GConductance
GGiga (10⁹ )
g_mSmall-signal transconductance
g_M, g_FEStatic or DC transconductance
G_M, G_FELarge-signal transconductance
HHenry
HMagnetic field strength H (A/m), distinct from magnetic flux Φ (Wb) and flux density B (T)Legacy record: “Magnetic field intensity, Magnetizing flux”. The source combines field intensity with flux wording; the quantities and units are distinct.
hhecto (10²)
HFHigh frequency
h_fbCommon base small signal forward current transfer-ratio
h_feCommon emitter small-signal forward current transfer-ratio (base input)
h_FECommon emitter DC forward current transfer-ratio, current gain (IC/IB)
h_rbCommon base small signal reverse transfer voltage ratio (emitter input)
h_rcCommon collector small signal reverse transfer voltage ratio (base input)
h_reCommon emitter small signal reverse transfer voltage ratio (base input)
HzHertz
ICurrent
iInstantaneous current
I/OInput/output
I_BBase current
ICIntegrated circuit
I_CCollector current
I_CBO, I_COCollector cutoff current (emitter open)
I_CEOCollector cutoff current (base open)
I_CERCollector cutoff current (specified resistance base-emitter)
I_EEmitter current
I_EBOEmitter cutoff current (collector open)
I_effEffective current
I_FForward current (DC)
i_FrForward recovery current (specified instantaneous value)
I_OOutput current (DC)
IRInfrared
I_RReverse current (DC)
i_RReverse current (peak)
i_RrReverse recovery current (specified instantaneous value)
I_SSecondary current
i_surgeSurge current
I_ZZener current
I_ZKZener knee current
I_ZMZener maximum current
I_ZTZener test current
JFETJunction field effect transistor
KCoefficient of coupling
kkilo (10³)
kHzKilohertz
kWhKilowatt-hour
LCoil, inductance
LCInductance-capacitance
LCDLiquid crystal display
LCRInductance-capacitance-resistance
LDRLight-dependent resistor
LEDLight emitting diode
LFLow frequency
L_MMutual inductance
LNALow noise amplifier
LSILarge scale integration
µMicro (10⁻⁶ )
mMilli (10⁻³ )
MMega (10⁶)
MMutual conductance
MCUMicrocontroller
MFMedium frequency
MHzMegahertz
MIMutual inductance
mmfMagnetomotive force
MOSMetal oxide semiconductor
MOSFETMetal oxide semiconductor field effect transistor
MPUMicroprocessor unit
NNumber of turns of inductor/transformer
nNano (10⁻⁹)
NCNormally closed
NCNo connection
NONormally open
NPNNegative-positive-negative
OP AMPOperational amplifier
pPico (10⁻¹²)
PPower
pInstantaneous power
PALProgrammable Array Logic
PAMPulse amplitude modulation
P_apApparent power
P_avAverage power
PCBPrinted circuit board
PCMPulse-code modulation
P_dPower dissipation of device (average)
PDMPulse-duration modulation
PIVPeak inverse voltage
PLDProgrammable Logic Device
PLLPhase locked loop
PMPhase modulation
PNPPositive-negative-positive
POTPotentiometer
P-PPeak to peak
PPMPulse-position modulation
PRFPulse repetition frequency
PRTPulse repetition time
PWMPulse width modulation
QCharge, also quality
qInstantaneous charge
QTransistor
RResistor
RCResistance-capacitance
rectRectifier
refReference
RFRadio frequencies
RFIRadio frequency interference
R_LLoad resistor
RLCResistance-capacitance-inductance
RMSRoot mean square
rpmRevolutions per minute
SCRSilicon controlled rectifier
SHFSuper high frequency
SIPSingle in-line package
SMCSurface Mount Components
SMDSurface Mount Devices
SMTSurface Mount Technology
SNRSignal-to-noise ratio
SOSmall Outline
SODSmall Outline Diode
SOICSmall Outline Integrated Circuit
SOTSmall Outline Transistor
SPDTSingle pole double throw
SWShort wave
TTera (10¹²)
TTransformer
tTime
T, tempTemperature
T_AAmbient Temperature
T_CTemperature, case
TCTime constant, also temperature coefficient
t_dPulse delay time
t_fPulse fall time
t_frForward recovery time
T_jJunction temperature
t_PPulse time
t_rPulse rise time
t_sPulse storage time
TTLTransistor-transistor logic
UHFUltra high frequency
UHVUltra high voltage
UJTUnijunction transistor
UVUltraviolet
VVolt (DC)
vVolt (peak), instantaneous voltage
VAVolt ampere
Va-cVolt (AC)
V_BBBase voltage (DC) supply
V_BEBase to emitter voltage (DC)
V_CCCollector voltage (DC) supply
V_CECollector to emitter voltage (DC)
V_CEsatCollector to emitter saturation voltage
V_EEEmitter voltage (DC) supply
V_FForward voltage drop
VCOVoltage controlled oscillator
VHFVery high frequency
V_inInput voltage
VLFVery low frequency
V_m, V_maxMaximum voltage
V_O, V_outOutput voltage (DC)
V_pPrimary voltage
V_RReverse voltage (DC)
V_rReverse voltage (peak)
WWatt, unit of power; qualify maximum/average conditions, not generic “RMS watts”Legacy record: “Watts (Max, Average, or rms)”. The source mixes RMS voltage/current with average real power.
wWatts (peak)
X_CCapacitive reactance
X_LInductive reactance
YAdmittance
ZImpedance
Z_inInput impedance
Z_oOutput impedance
Z_pPrimary impedance
Z_sSecondary impedance

Frequently asked questions

Should an NC pin be grounded?

No. NC can mean not connected or normally closed. Even “not connected” must be interpreted with the manufacturer’s leave-open or do-not-connect instructions.

Does this glossary specify component ratings?

No. It explains names. Actual limits, test conditions, temperature and safe operating area come from the exact device datasheet.

Related tools and references

Sources and verification

Legacy baseline: the Electrodoc Pro 5.2 data package. Raw records are retained and checked factual corrections are shown explicitly.