PCB TOOLS / ELECTRONICS WORKBENCH

Op-Amp Gain, Output and Preferred Resistor Pairs

Supports noninverting, inverting and matched differential stages. Edit gain or output to search preferred resistor pairs and recalculate actual results.

Inputs and reverse calculation

Calculated results

Default example / current valid result
R11 kΩ
R21 kΩ
Actual gain2
Actual output2 V

How to interpret the result

R1, R2 and input edits calculate forward. Gain/output edits search the selected E series and display actual gain. The differential input is Vin+−Vin−.

Formulas and units

Noninverting Av=1+R2/R1; inverting Av=−R2/R1; matched differential Av=R2/R1. Vout=Av·Vin. Reverse search uses R1/R2.

Worked example

R1=1kΩ, R2=10kΩ and Vin=0.1V give 1.1V noninverting, −1V inverting and 1V differential. At Vin=0, output is zero while resistance still defines gain.

Scope and limitations

Ideal linear op-amp model; supply rails, common-mode range, GBW and output-current limits are excluded. Differential resistor ratios must match. Reverse ratios are limited to 10⁻⁶–10⁶; zero/infinite-resistor unity-gain degeneracy is rejected. Signed voltages are supported; gain at Vin=0 is defined by resistor ratio, avoiding 0/0.

Common questions

Why can output change after preferred-value search?

Preferred values are discrete; actual gain and deviation from the target are shown.

Does this check output saturation?

No. The original fields contain no supply-rail inputs; check the device separately.

Related tools

Formula and data sources

Rebuilt from the extracted Electrodoc Pro 5.2 specification. Added, inferred and corrected behavior is identified in the limitations. Updated 2026-11-15.